 |
FIREFIGHTER SCRIPT EMBLEM MOUNTING INSTRUCTIONS MOUNTING THE FIREFIGHTER FENDER EMBLEM The Firefighter Emblem can be mounted on any clean flat surface. To mount on fender in place of the existing stock emblem, remove stock emblem by removing the front two bolts from the front fender. Pivot the fender up to better access the stock emblem compression washers. Remove washers with a small flat blade screw driver or a kitchen knife. After you have removed the stock emblem, lower the fender back in place and temporarily put fender bolts back on. Dry fit the Firefighter Emblem in place so it covers the existing holes left by the stock emblem. Use a piece of tape and a pencil to mark position on fender. Clean surface with alcohol (not the kind you drink). Place Firefighter Emblem on fender, remove front bolts, pivot fender up and place a small amount to silicone to the holes. Now you can put everything back together. Stand back and admire your cool Firefighter Emblem. Place Masking tape as shown Peel off backing and install |
